boot message

[whewetson]

On booting a 1601 router, I get the following

00:00:04: %SYS-2-INTSCHED: 'sleep for' at level 4

-Process= "Init", ipl= 4, pid= 2

-Traceback= 2114172 2107FCC 2249F24 203D2FA 210D33A 210D3BC 20735AA 207373A

00:00:04: %SYS-2-INTSCHED: 'sleep for' at level 4

-Process= "Init", ipl= 4, pid= 2

-Traceback= 2114172 2107FCC 2249F24 203D2FA 210D33A 210D3BC 20735AA 207373A

00:00:04: %SYS-2-INTSCHED: 'sleep for' at level 4

-Process= "Init", ipl= 4, pid= 2

-Traceback= 2114172 2107FCC 2249F24 203D2FA 210D33A 210D3BC 20735AA 207373A

00:00:05: %SYS-2-INTSCHED: 'sleep for' at level 4

-Process= "Init", ipl= 4, pid= 2

-Traceback= 2114172 2107FCC 2249F24 23A90D4 210D33A 210D3BC 20735AA 207373A

00:00:05: %SYS-2-INTSCHED: 'sleep for' at level 4

Is this a harware problem? This is the same router that wont forward a DHCP request.

thanks

Wayne

[frejac]

Which IOS version do you use?

There seems to have been a bug in 12.0 and 12.1 that may cause these errors. (BugID:CSCdp75287)

There is another one too, (CSCds11984), but it's marked as duplicate and I dont have permissions to view the original (BugID:CSCds02998)

The error message decoder gives:

1. %SYS-2-INTSCHED: '[chars]' at level [dec]

The scheduler was entered from an interrupt service routine (ISR).

Recommended Action: Copy the error message exactly as it appears on the console or in the system log, include the stack trace, and report it to your Cisco technical support representative.