Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Is it a good idea to deploy a central Aironet 350 using a 14dBi MAST MOUNT SECTOR with all the remote sites using 13.5dBi MAST/WALL MOUNT YAGI’s? Is the mismatching of antennas considered to be good practice for wireless bridging?The reason I am aski...
HiI am having a problem configuring ip rtp with interleaving on two 1721's prioritizing voice traffic between two ip voice devices over a 128k point to point link. This is my config...!interface Multilink1 ip address 192.168.24.2 255.255.255.0 no cdp...
HiI am having a problem getting ip rtp priority to work on 2 multilinks. This is resulting in very poor voice quality on lines 2 & 3 for voice traffic travelling towards the remote routers . It works fine on the remote routers traveling back to the H...
On booting a 1601 router, I get the following00:00:04: %SYS-2-INTSCHED: 'sleep for' at level 4-Process= "Init", ipl= 4, pid= 2-Traceback= 2114172 2107FCC 2249F24 203D2FA 210D33A 210D3BC 20735AA 207373A00:00:04: %SYS-2-INTSCHED: 'sleep for' at level 4...
HiI am having a problem on a 1601 router on a remote site in a frame-relay point to multipoint network. There are currently 9 working remote sites where the routers are forwarding DHCP requests to a central DHCP server except the one 1601. Any ideas ...
Plus minus a mile in each direction; will it be acceptable to use a second yagi on the Ho site? Is there a way not to broadcast the SSID or implement mac filtering on the 350’sWayne
