HI all,
This router (7304) has a flash memory and disk0 devices, the thing is that if you don´t specify the boot system lines in the config it starts with the first image stored in the disk0 device, by the way, there are disk0 and stby-disk0 devices but only a flash memory without backup. I´m confused because if I try to boot from the flash forcing the router with the proper boot system line it boots in a wrong way with the bootsystem image. Can someone clarify this behaviour? I paste a dir ? output.
ROUTER#dir ?
/all List all files
/recursive List files recursively
all-filesystems List files on all filesystems
bootdisk: Directory or file name
cns: Directory or file name
disk0: Directory or file name
flash: Directory or file name
null: Directory or file name
nvram: Directory or file name
revrcsf: Directory or file name
stby-bootdisk: Directory or file name
stby-disk0: Directory or file name
stby-nvram: Directory or file name
stby-rcsf: Directory or file name
system: Directory or file name
tar: Directory or file name
<cr>
Thanks in advance.
Regards,
