cab-mcp-lc connectors

[yallies]

hello

I have to install mode conditioning patch cord cod CAB-MCP-LC and I find nowhere the technical spec for it.

Can you indicate to me the type and number of connectors on each side ?

thanks

[b.hsu]

When using the long wavelength/long-haul (LX/LH) GBIC with 62.5-micron diameter MMF, you must install a mode-conditioning patch cord (Cisco product number CAB-GELX-625 or equivalent) between the GBIC and the multimode fiber (MMF) cable on both the transmit and receive ends of the link. The patch cord is required for link distances greater than 984 feet (300 meters).

http://www.cisco.com/en/US/products/hw/routers/ps368/products_installation_guide_chapter09186a008007e070.html

[yallies]

hello

and thank for your answer, but my question is to know wich are the connector (type : SC , LC ,..?) and the number of fibre (duplex ?) on each side of the mode conditioning patch cord CAB-MCP-LC=

regards