Hello
I was wondering what the phrase "Call Handle failed for Modem" from debug modem and no carriers from show modem command means.
Heres my show modem =
MCOM firmware: 1.3.3, Modem firmware: 2.3.17, DSP firmware: 0.0.2
MCOM firmware: 1.3.3, Modem firmware: 2.3.17, DSP firmware: 0.0.2
Modem config: Incoming and Outgoing
Protocol: Normal, Compression: None
Management port config: AT session
Last clearing of "show modem" counters: 00:38:58
20 incoming completes, 13 incoming failures
0 outgoing completes, 0 outgoing failures
0 failed dial attempts, 0 ring no answers, 0 busied outs
0 no dial tones, 0 dial timeouts, 0 watchdog timeouts
11 no carriers, 0 link failures, 0 resets, 0 recover oob
0 protocol timeouts, 0 protocol errors, 0 lost events
0/0 speedshifts initiated/accepted, 1/16 retrains initiated/accepted
Thanks
