02-15-2012 11:54 PM - edited 03-03-2019 06:29 AM
Hi Guys...
We have a switch Cisco Catalyst 2900 Series XL Model WS-C2924-XL-EN. 8 MB DRAM 4 MB FLASH
I already tried the discussions regarding flash_init dir_flash: boot and the likes.
By the way, I already downloaded the IOS for our switch through Cisco Website. Settings are default through Hyper Terminal
Here's the thing:
Whenever I transfer the .bin file using XMODEM, it prompted an error "Transfer cancelled by remote computer"
Kindly refer to the attachment for the screenshot.
It would be great if you can help me guys. =)
Thanks!
02-16-2012 12:15 AM
Do you have ability to transfer image via TFTP, it would be much quicker.
For Xmodem transfer check that both switch and PC using the same setting as speed, error correction,etc
---
Posted by WebUser Aleksandr Yanovskiy
02-16-2012 12:20 AM
so you suggest that i'll use TFTP Server to upload IOS to our switch?
Definitely, I will do that if XMODEM can't be fix.
Can you please give me a reliable Free TFTP Server?
....
02-16-2012 03:48 AM
http://www.tftp-server.com/ You can use this for MS platform. One time I have no responsibility lo load image by TFTP, I loaded image 30 minutes, by tftp it takes near 5 minutes.
When you choose speed of Xterm, for exmaole 9600, its 9600bits per second. So you can calculate time you need to load image
---
Posted by WebUser Aleksandr Yanovskiy
---
Posted by WebUser Aleksandr Yanovskiy
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide