Cisco AnyConnect and Cisco ASR 1000

[j44mistry]

We are currently using Cisco VPN Client for Windows 7 connecting to Cisco ASR 1000 and Cisco 3925 Routers.  

To start using Cisco AnyConnect Client with existing Routers:-

1. Will the client still work with Router IOS ?

2. What additional configuration is required if not ?

[viyuan700]

VPN client you are using is Ipsec based client whereas Anyconnect Client is SSL based VPN. 

1. Will the client still work with Router IOS ? Yes 3925 supports and  you need license. Also  IOS version  15.0 & above

2. What additional configuration is required if not ? As it is totally different yes need different configuration. you will need a certificate for you VPN address . Link below have some configuration ideas.

http://www.cisco.com/c/dam/en/us/td/docs/routers/access/cisco_router_and_security_device_manager/application/notes/WebVPN.pdf

Check for all required for Router based VPN. We are running on ASA.

http://www.cisco.com/c/en/us/products/collateral/security/ios-sslvpn/product_data_sheet0900aecd80405e25.html

[j44mistry]

What Anyconnect version can I use to work with Cisco 3925 IOS 15.x   ?

[viyuan700]

Please check your requirement and see what version would be the right for your scenario. Otherwise you can use the latest version . Such as if you need Windows 8 support then the first version which support is 3.1.04072 & later.

Please check the example using version 3.1.00495

http://www.firewall.cx/cisco-technical-knowledgebase/cisco-routers/904-cisco-router-anyconnect-webvpn.html

[j44mistry]

Hi,

Thanks for additional info.

I have uploaded anyconnect pkg to router and configured as per instructions provided.

How do I download the client to windows from internet or do I have to do this from the Lan only ?   Do I just specify the gateway address of router using https ?