Hi,
i am trying to configure cisco nexus 5548UP with GLC-LH-SMD 1g sfps after changing the speed of the port the port came up and reason shows none. but there is no communication between the ports. do i have to do any other configuration, also i saw that there is fc configuration and eth configuration on nexus switch currently i am using eth type. is this correct or do i need to switch to fc.
please help
int br:
(config-if)# sh int br
--------------------------------------------------------------------------------
Ethernet VLAN Type Mode Status Reason Speed Por
t
Interface Ch
#
--------------------------------------------------------------------------------
Eth1/1 1 eth access up none 1000(D) --
Eth1/2 1 eth access down SFP validation failed 10G(D) --
Eth1/3 1 eth access down SFP validation failed 10G(D) --
Eth1/4 1 eth access down SFP validation failed 10G(D) --
Eth1/5 1 eth access down SFP validation failed 10G(D) --
Eth1/6 1 eth access down SFP validation failed 10G(D) --
Eth1/7 1 eth access down SFP validation failed 10G(D) --
Eth1/8 1 eth access down SFP validation failed 10G(D) --
Eth1/9 1 eth access down SFP validation failed 10G(D) --
Eth1/10 1 eth access down SFP validation failed 10G(D) --
Eth1/11 1 eth access down SFP validation failed 10G(D) --
Eth1/12 1 eth access down SFP validation failed 10G(D) --
Eth1/13 1 eth access down SFP validation failed 10G(D) --
Eth1/14 1 eth access down SFP validation failed 10G(D) --
Eth1/15 1 eth access down SFP validation failed 10G(D) --
Eth1/16 1 eth access down SFP validation failed 10G(D) --
Eth1/17 1 eth access down SFP validation failed 10G(D) --
Eth1/18 1 eth access down SFP validation failed 10G(D) --
Eth1/19 1 eth access down SFP validation failed 10G(D) --
Eth1/20 1 eth access down SFP validation failed 10G(D) --
Eth1/21 1 eth access down SFP validation failed 10G(D) --
Eth1/22 1 eth access down SFP validation failed 10G(D) --
Eth1/23 1 eth access down SFP validation failed 10G(D) --
Eth1/24 1 eth access down SFP validation failed 10G(D) --
Eth1/25 1 eth access down SFP validation failed 10G(D) --
Eth1/26 1 eth access down SFP validation failed 10G(D) --
Eth1/27 1 eth access down SFP validation failed 10G(D) --
Eth1/28 1 eth access down SFP validation failed 10G(D) --
Eth1/29 1 eth access up none 1000(D) --
Eth1/30 1 eth access down SFP validation failed 10G(D) --
Eth1/31 1 eth access down Link not connected 1000(D) --
Eth1/32 1 eth access down Link not connected 1000(D) --
