Cisco SMB connector (found on WAN Switches)

[andy.davis]

Can any one confirm if the Cisco SMB connector is a 43 type?

These are found on MGX CESM cards etc.

[thomas.chen]

I think it’s a coaxial style connector like this http://www.lodanwest.com/pdf/telco%20coax%20brochure.pdf

[emcclean]

Depends on the type of card - 4 port CESM back cards can be either BNC or DB15 connectors - depends on the back card ordered.

8 port CEMS 's for T1's use RJ48 connectors, E1 use either RJ48 or SMB connectors - again you order the type of card you want.

If you have access to the nodes do a dspcds or dspcd x to find out the type of connector.

[andy.davis]

The connector type is SMB, we have had a lot of trouble identifying this connector. If you order SMB in the UK it is a lot smaller than the one on the back card. The 43 type connector seems to fit ok (but not perfect).

Cheers

Andy