09-05-2003 08:07 AM - edited 03-02-2019 10:08 AM
I am trying to find out what the FEAC code that is kicking back from the the description below mean.
00:00:12: %LINK-3-UPDOWN: Interface FastEthernet0/0, changed state to up
00:00:12: FEAC Code: 0x16
00:00:12: %SYS-5-CONFIG_I: Configured from memory by console
00:00:12: %SYS-5-RESTART: System restarted --
Cisco Internetwork Operating System Software
IOS (tm) 7200 Software (C7200-IS-M), Version 12.1(3a)T3, RELEASE SOFTWARE
(fc1)
Copyright (c) 1986-2000 by cisco Systems, Inc.
Compiled Wed 06-Sep-00 00:04 by ccai
00:00:13: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0,
chang
ed state to up
00:00:15: FEAC Code: 0x16
00:00:15: %LINK-3-UPDOWN: Interface ATM2/0, changed state to down
00:00:15: FEAC Code: 0x3F
00:00:16: %LINEPROTO-5-UPDOWN: Line protocol on Interface ATM2/0, changed state
to down
00:04:36: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0,
chang
ed state to down
00:04:43: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0,
chang
ed state to up
00:19:30: %LINK-3-UPDOWN: Interface ATM2/0, changed state to up
00:20:30: FEAC Code: 0x0E
00:20:31: FEAC Code: 0x3F
00:20:32: %LINK-3-UPDOWN: Interface ATM2/0, changed state to down
00:20:42: %LINK-3-UPDOWN: Interface ATM2/0, changed state to up
09-05-2003 10:48 PM
FEAC stands for Far-End Alarm and Control
09-08-2003 08:04 AM
Thank you! I know that part, I also know that is a feature for that type of router. But I was looking for more specific details. I was looking to get a more detail explanition on the actual 0x16 etc.. i was hoping someone might have seen something similar. Thank you!
09-08-2003 11:12 AM
Nikita
what you have to do is convert this binary to hex
011001 DS3 equipment failure hex value 0x19
001110 LOS hex value 0xE
010110 AIS hex value 0x16
000000 OOF hex value 0x0
011010 DS3 IDLE hex value 0xE
001111 DS3 equip failure hex value F
011101 Common equip failure hex value 1D
line loop activate 000111 hex value 0x7
line loop deactivate 001110 hex value 0x1c
DS3 line 011011 hex value 0x1B
09-08-2003 12:02 PM
Thank you very much this has been very helpful. May I ask how you come up with such information? I have just begun to take my first Cisco class. I have not reached that level yet. Is all very facinating. Thank you for your help. Hope to here back
09-08-2003 12:14 PM
I beleve that one of my coworkers found it on the ATM forum website
09-09-2003 07:09 AM
Well, thank you for your help
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide