Configuration for a firewall

[4r-brown]

I have a firewall that I want to place between a 7206 and our network equipment. The 7206 ether/0 interface is connected to the hub that connects to all the servers. I have the firewall configured with the gateway of the 7206 for the outbound but I am not sure where to put the route in the 7206 so it knows where the servers are on the inbound side. Any help would be appreciated.

Thanks

Rich

[jdfroelich]

If your router interface is connected to the same hub as your servers, you don't need a route statement to support the server subnet.

Don Lakey