05-14-2001 04:06 PM - edited 03-01-2019 06:42 PM
Kindly suggest a way on how to configure my preexixting 3660 router configured as pri ras(for aaa of isdn calls) to also accept normal pstn dialup calls.
since it can support 30 simultaneous isdn user logins, i want suppose 15 slots reserved for isdn user calls and 15 reserved for pstn dialup calls, keeping the signalling and the dialing number same
05-14-2001 04:07 PM
Kindly suggest a way on how to configure my preexixting 3660 router configured as pri ras(for aaa of isdn calls) to also accept normal pstn dialup calls.
since it can support 30 simultaneous isdn user logins, i want suppose 15 slots reserved for isdn user calls and 15 reserved for pstn dialup calls, keeping the signalling and the dialing number same
I am using ios ver 12.1(t)
05-24-2001 02:45 PM
I don't know how clean this config is since it was done before my time, but this works for us on a 3640 with a single PRI and 12 MICA modems that we use for RAS and ISDN dial backup for our WAN. This is only the stuff pertainent to RAS - use your own dialer config for your BRI dialups. I'd highly suggest testing this in a lab first, if possible. You can omit the IPX statements if you're doing an IP only dialup. Also, the RADIUS config is for Novell NDS.
----
aaa new-model
aaa authentication login default local
aaa authentication ppp dialin local radius
!
ip address-pool local
ipx routing
ipx internal-network xxxxx
!
async-bootp dns-server 1.1.1.1 2.2.2.2 3.3.3.3
async-bootp nbns-server 1.1.1.1 2.2.2.2
!
controller T1 0/0
framing esf
linecode b8zs
pri-group timeslots 1-24
!
interface Loopback0
ip address 1.1.1.2 255.255.255.0
ipx network zzzz
!
interface Serial0/0:23
description ISDN D-channel for T1/PRI
no ip address
encapsulation ppp
no keepalive
dialer rotary-group 0
dialer-group 1
isdn switch-type primary-ni
isdn incoming-voice modem
no fair-queue
!
interface Group-Async1
ip unnumbered Loopback0
encapsulation ppp
dialer in-band
dialer idle-timeout 1800
async mode interactive
ipx ppp-client Loopback0
peer default ip address pool default
no fair-queue
ppp authentication pap chap dialin
ppp multilink
group-range 33 44
!
interface Dialer0
ip address 1.1.1.200 255.255.255.252
encapsulation ppp
no ip mroute-cache
dialer in-band
dialer idle-timeout 1800
dialer-group 1
no peer default ip address
no fair-queue
ppp authentication pap chap dialin
ppp multilink
!
ip local pool default 2.2.2.1 2.2.2.100
!
radius-server host 2.2.2.100 auth-port 1645 acct-port 1646 non-standard
radius-server key keyid
05-25-2001 06:52 AM
Hello, Send me the hardware config in respect of the modems, once I have that I can help u in configuring the PRI and PSTN, aslo mention whther thsi PSTN are Digital lines or not. For a hint, u can break the Group Async Intefcaes to make provison for both.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide