Configuring Distribute-List on ATM Subinterfaces

[jgrizzuti]

There is a Router with ATM interface with Subinterfaces on the central site , the remote sites have a frame-relay connection (inter-working). We configured Virtual template due to get QoS (Interleaving)

We want to apply ditribute-list on the central site but we can´t apply distribute-list on the Virtual Template (There is no INTERFACE MULTILINK on the ATM configuration). You can apply distribute-list to a Virtual Access but they don´t keep in the NVRAM configuration.

The option we thought is to configure differents EIGRP AS and make Redistribution .

Does somebody have a CLUE or Suggestion ?

Thanks

Javier

[oleg_vk]

Hi Javier,

If remote sites have thier IP addresses on FR link the same each time (static?), maybe option "gateway" in command "distribute-list 101 gateway PREFIX-LIST-OF-PTP-REMOTE-SITES in" would help?

Best regards,

Oleg.