Dial in to CON port on a 806 router?!?

[wongn]

since the 806 router dosn't have an AUX port, can I dial-in to the console port? If not, how do I go about configuring it remotely if the line fails

[thisisshanky]

what modem are you using with 806. US robotics would need special configuration of the modem, before dialing in....also you need to put some commands in the line con 0 mode.

http://www.cisco.com/en/US/tech/tk13/tk426/technologies_configuration_example09186a00800941c9.shtml

is a sample link for USR modem.

Some modems like Zoom, needs string configured in them too...Let us know what modem you ar eusing.

[wongn]

I'm using a Hayes Optima 33.6 modem.

[thisisshanky]

http://www.cisco.com/en/US/products/sw/iosswrel/ps1839/products_feature_guide09186a0080087bf9.html#xtocid8

The above link might be of some help.

[wongn]

Isn't this for the aux port?

unless I misread it...

anyway I can get it working on the console port since the 806 router doesn't have an aux.

thx