DSLAM 6260

[cgravell]

Hi,

Can you please shed some light on the following SH DSL INT ATM X/Y output? I im not sure what the implications of high or low values of each are for troubleshooting?

ATM Statistics:

Interleaved-Path Counters:

Cells: downstream: 14696931 upstream: 6655857

HEC errors: downstream: 475682 upstream: 3633

LOCD events: near end: 163 far end: 1

Fast-Path Counters:

Cells: downstream: 0 upstream: 0

HEC errors: downstream: 0 upstream: 0

LOCD events: near end: 0 far end: 0

DSL Statistics:

Init Events: 4268

Far End LPR Events: 17

Transmitted Superframes: near end: 440921460 far end: 0

Received Superframes: near end: 440921460 far end: 0

Corrected Superframes: near end: 358813 far end: 20666723

Uncorrected Superframes: near end: 445631 far end: 966902

LOS Events: near end: 79 far end: 0

LOF/RFI Events: near end: 0 far end: 0

ES Events: near end: 6940 far end: 452939

Thanks

[vkapoor5]

I am not sure about the implication of these values, but check the command reference for the specific hardware/software that you are using. For eg. this doc has some explanation for a specific output shown by the command:

http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122newft/122tcr/122twr/wftbrda.htm#1056740