07-12-2016 03:16 AM - last edited on 03-25-2019 03:09 PM by ciscomoderator
EHWIC-4G-LTE-G is the replacement for the EHWIC-3G-HSPA+7. what is the 3G configuration, PPP, on the 4G card? The command deos not activated on the 1900 ISR chassis with sec license activated.
07-13-2016 12:18 AM
This is more of a general 4G config. You'll need to adopt it to your interface names.
cellular 0 lte profile create 1 <your providers APN>
chat-script lte "" "AT!CALL" TIMEOUT 20 "OK"
interface Cellular0
ip address negotiated
ip nat outside
ip virtual-reassembly in
encapsulation slip
dialer in-band
dialer idle-timeout 600 inbound
dialer string lte
dialer-group 2
dialer-list 2 protocol ip permit
line 3
script dialer lte
modem InOut
07-13-2016 12:19 AM
You don't need a SEC licence to make a 4G EHWIC work. You will however need a new enough IOS to support the new EHWIC.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide