EIGRP with 805,ios upgrade error!

[kadirkocaer]

I try to upgrade my 805 with a new ios,but device generate me an error(those below)what can i do ?

Router#copy tftp: flash:

Address or name of remote host [10.0.0.2]?

Source filename [c805-sy6-mw.122-11.T9.bin]?

Destination filename [c805-sy6-mw.122-11.T9.bin]?

Accessing tftp://10.0.0.2/c805-sy6-mw.122-11.T9.bin...

Loading c805-sy6-mw.122-11.T9.bin from 10.0.0.2 (via Ethernet0): !

Build [cmong 11.T9] -- Mon Jun 23 17:34:45 PDT 2003

File name: c805-sy6-mw

RAM size: 0x009dbe88 (10337928)

Raw size: 0x007ff9c8 (8387016)

Image size: 0x0045531c (4543260)

%Error writing flash:/c805-sy6-mw.122-11.T9.bin (No space left on device)

[thisisshanky]

You will have to erase your flash first to load the new image.

http://www.cisco.com/en/US/products/hw/routers/ps380/products_configuration_guide_chapter09186a008007cdd2.html

[kadirkocaer]

İ had try to do this,but it didnt work!

Router#erase flash

Erasing the flash filesystem will remove all files! Continue? [confirm]

|>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>|

Erase of flash: complete

Router#copy tftp flash

Address or name of remote host [10.0.0.2]?

Source filename [c805-sy6-mw.122-11.T9.bin]?

Destination filename [c805-sy6-mw.122-11.T9.bin]?

Accessing tftp://10.0.0.2/c805-sy6-mw.122-11.T9.bin...

Loading c805-sy6-mw.122-11.T9.bin from 10.0.0.2 (via Ethernet0): !

Build [cmong 11.T9] -- Mon Jun 23 17:34:45 PDT 2003

File name: c805-sy6-mw

RAM size: 0x009dbe88 (10337928)

Raw size: 0x007ff9c8 (8387016)

Image size: 0x0045531c (4543260)

%Error writing flash:/c805-sy6-mw.122-11.T9.bin (No space left on device)

Router#

[thisisshanky]

How much flash do you have ? And what is the size of the image you are trying to load into flash ? 8MB ?

[kadirkocaer]

ios image size is 4.33 mb

flash:

Router#sh flash

Directory of flash:/

0 ---- 49096 Aug 02 1999 23:35:03 TinyROM-1.2(2)

1 ---- 49096 Nov 08 2000 03:38:37 TinyROM-1.4(1)

44 -r-x 2635044 Aug 30 2000 22:41:19 [J1214.OOO]

4194304 bytes total (1376256 bytes free)

[thisisshanky]

4194304 = 4 megabytes. SO definitely with this flash size, you cannot load a 4.33 mb image. You will have to either upgrade flash or download an image < 4 mb.

[kadirkocaer]

But i have to perform eigrp on router ,it's own original image doesnt support eigrp!is any ios image supports eigrp less than 4.1 mb?

[thisisshanky]

Ok..you need atleast IP Plus image to run EIGRP. Most IOS I can see for 805 require atleast 8 mb flash. ( I could have missed something at Software center)

I can only see 12.0 IOS images which require only 4 mb of flash. But i am not sure if you will be able to download this software now. You can give it a try at CCO.

12.0(7)T3

c805-sy6-mw.12.0-7.T3

I would recommend you to upgrade flash though.

[kadirkocaer]

İ couldn't get this file,i try to find ,and you can send me to kkocaer@gmail.com

your sincerely.