HELP !!! PPP with Predictor compress and CBWFQ

[nceitil]

Hello,

I can't seem to to get CBWFQ to work with PPP Predictor compression.

I'm using a 1721 and 2620XM both running 12.3.5b IP base.

All traffic seems to only match the default queue. I'm getting compression ratios of 3-4 to 1 so I would like to keep it on.

However NO traffic seems to match the other queues. I've pushed the line to 99% without any success.

Anyone got any suggestions. I have attached the config of two routers. The network is a star topology. I have several sites hanging off the 2600. All of them are 1721 routers.

Thanks

Nuno

[olorunloba]

Where is the traffic matching only the default class, at the remote or the head office.

Note that at the head office, I would have expected that the access-list would match the source tcp port and not the destination port, since the traffic direction is on the output.

[nceitil]

Hi

At both ends it only matches the default class.

You right about the source / dest port. I will go ahead and change that. Still the last entry is the server that the traffic would either be going to or coming from. So I should still matches based on that entry alone.

Any ideas ???