How to Check the serial number on 7206 VXR remotly

zulfi · ‎06-12-2003

Show ver dosn't show the serial number:

Sunset_newT3#sh ver

Cisco Internetwork Operating System Software

IOS (tm) 7200 Software (C7200-IS-M), Version 12.1(14)E, EARLY DEPLOYMENT RELEASE

SOFTWARE (fc1)

Compiled Sat 14-Dec-02 00:28 by eaarmas

Image text-base: 0x60008C08, data-base: 0x612B0000

ROM: System Bootstrap, Version 12.1(20000710:044039) [nlaw-121E_npeb 117], DEVEL

OPMENT SOFTWARE

BOOTLDR: 7200 Software (C7200-KBOOT-M), Version 12.1(3a)E5, EARLY DEPLOYMENT REL

EASE SOFTWARE (fc1)

Sunset_newT3 uptime is 24 weeks, 4 days, 19 hours, 54 minutes

System returned to ROM by reload at 18:40:44 PST Sat Dec 21 2002

System restarted at 18:42:02 PST Sat Dec 21 2002

System image file is "disk0:c7200-is-mz.121-14.E.bin"

cisco 7206VXR (NPE400) processor (revision A) with 245760K/16384K bytes of memory.

Processor board ID 21285963

R7000 CPU at 350Mhz, Implementation 39, Rev 3.2, 256KB L2, 4096KB L3 Cache 6 slot VXR midplane, Version 2.1

Last reset from power-on

Bridging software.

X.25 software, Version 3.0.0.

1 Ethernet/IEEE 802.3 interface(s)

1 FastEthernet/IEEE 802.3 interface(s)

1 Gigabit Ethernet/IEEE 802.3 interface(s)

1 Serial network interface(s)

125K bytes of non-volatile configuration memory.

46976K bytes of ATA PCMCIA card at slot 0 (Sector size 512 bytes).

8192K bytes of Flash internal SIMM (Sector size 256K).

Configuration register is 0x102

Thanks,

vmiller · ‎06-12-2003

No Way unless someone coded into the snmp chassis-id

zulfi · ‎06-12-2003

Thanks for you ans

So how does it works in other models link 6500 or 3500....

thisisshanky · ‎06-12-2003

I think "show diag" or "show diagbus" should help in case of 7200.

Regarding your second question, I thought this discussion ( which was posted way back in 2002) might be of interest to you. Check it out.

Sankar Nair
UC Solutions Architect
Pacific Northwest | CDW
CCIE Collaboration #17135 Emeritus