08-15-2006 10:19 PM - edited 03-03-2019 04:32 AM
Hello,
I have a 3550 switch with 48 port having 12.1 code.
Need to know which port is causing the highest traffic , i mean to track which user is downloading/uploading the most.
I was able to track this in CATOS with the command sh top and that will tell the port, but in IOS based switches i was not able to find
Can some one help.
08-15-2006 11:39 PM
You can try with the following command:
show interfaces summary
Output shows the traffic for all ports instead of the top one only, but you can find the top from this output. Or you can install an MRTG or Cacti for monitor the used bandwith.
bye
FCS
Please rate me if I helped.
08-18-2006 02:01 AM
hi, thanks for the info, i cant use Cacti since there are so many ports and it will be more work for me.
how ever your command was useful to me
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide