ā07-09-2012 04:25 AM - edited ā03-03-2019 06:40 AM
Hello,
does anyone know if these messages are more than just informational ?
If yes, what action you suggest we should do ?
276773: Jul 7 07:55:15.559: %IGMP-3-QUERY_INT_MISMATCH: Received a non-matching query interval 0, from querier address x.x.x.x
276774: Jul 7 07:56:16.643: %IGMP-3-QUERY_INT_MISMATCH: Received a non-matching query interval 0, from querier address x.x.x.x
276775: Jul 7 07:57:21.060: %IGMP-3-QUERY_INT_MISMATCH: Received a non-matching query interval 0, from querier address x.x.x.x
276776: Jul 7 07:58:22.148: %IGMP-3-QUERY_INT_MISMATCH: Received a non-matching query interval 0, from querier address x.x.x.x
276777: Jul 7 07:59:26.233: %IGMP-3-QUERY_INT_MISMATCH: Received a non-matching query interval 0, from querier address x.x.x.x
276778: Jul 7 08:00:26.649: %IGMP-3-QUERY_INT_MISMATCH: Received a non-matching query interval 0, from querier address x.x.x.x
Next lines show the configuration of VLAN (IGMP) that is configured on core switch
Vlan xx is up, line protocol is up
Internet address is X.X.X.X/24
IGMP is enabled on interface
Current IGMP host version is 2
Current IGMP router version is 3
IGMP query interval is 60 seconds
IGMP configured query interval is 60 seconds
IGMP querier timeout is 120 seconds
IGMP configured querier timeout is 120 seconds
IGMP max query response time is 10 seconds
Last member query count is 2
Last member query response interval is 1000 ms
Inbound IGMP access group is not set
IGMP activity: 1484 joins, 1322 leaves
Multicast routing is enabled on interface
Multicast TTL threshold is 0
Multicast designated router (DR) is x.x.x.x (this system)
IGMP querying router is x.x.x.x
No multicast groups joined by this system
IGMP snooping is globally enabled
IGMP snooping CGMP-AutoDetect is globally enabled
IGMP snooping is enabled on this interface
IGMP snooping fast-leave (for v2) is disabled
IGMP snooping querier is disabled.
IGMP snooping explicit-tracking is enabled
IGMP snooping last member query response interval is 1000 ms
IGMP snooping report-suppression is enabled
Thank you for your time
Marios
ā12-13-2017 04:45 PM
probably IGMP version mismatch. run sh ip igmp interface on both interfaces that are connected to see if they are the same. probably just need to put one side to version 3 to match
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide