Hello friends,
I procured one Cisco 2612 Router with 16 MB flash. The router was with 12.1 IOS. I tried to upgrade the ios to 12.3 but I am getting the following error.
Please refer the attached output.
rommon 1 > dir flash:
File size Checksum File name
15575040 bytes (0xeda800) 0xff60 c2600-Ik9o3s3-Mz.123-3A.bin
rommon 2 > xmodem -c c2611-j1s3-mz.122-15.T2.bin
Do not start the sending program yet...
File size Checksum File name
15575040 bytes (0xeda800) 0xff60 c2600-Ik9o3s3-Mz.123-3A.bin
WARNING: All existing data in bootflash will be lost!
Invoke this application only for disaster recovery.
Do you wish to continue? y/n [n]: y
Ready to receive file c2611-j1s3-mz.122-15.T2.bin ...
Erasing flash at 0x60fc0000
program flash location 0x60e70000
Download Complete!
program load complete, entry point: 0x80008000, size: 0xe70a2c
Self decompressing the image : #################################################
################################################################################
################################################################################
############################################# [OK]
*** Machine Check Exception ***
PC = 0x8192febc, Vector = 0x200, SP = 0x8000612c
monitor: command "xmodem" aborted due to exception
rommon 3 >
Thanks/Regards
Atul
