Hello Dan
No, i mean to monitor the Backplane Traffic and especially to set a thershold if a peak is reached and then to generate a syslog...
This example shows how to set a threshold in CATOS:
Console> (enable) set traffic monitor help
Usage: set traffic monitor
(threshold = 0..100 in percentage)
Console> (enable) set traffic monitor 60
Traffic monitoring threshold set to 60%.
Console> (enable) show traffic
Threshold: 60%
Backplane-Traffic Peak Peak-Time
----------------- ---- -------------------------
0% 0% Tue Apr 16 2002, 08:01:53
Fab Chan Input Output
-------- ----- ------
0 0% 0%
1 0% 0%
2 0% 0%
3 0% 0%
4 0% 0%
5 0% 0%
6 0% 0%
7 0% 0%
8 0% 0%
9 0% 0%
10 0% 0%
11 0% 0%
12 0% 0%
13 0% 0%
14 0% 0%
15 0% 0%
16 0% 0%
17 0% 0%
Console> (enable)
Some sample syslog messages are as follows:
2000 Jan 11 06:00:27 PST -07:00 %SYS-4-SYS_HITRFC: 62% traffic detected on switching bus (A)
2000 Feb 21 12:00:27 PST -07:00 %SYS-4-SYS_HITRFC: 65% traffic detected on switching bus
Adrian
