ip ssh break-string

[crhodes]

Hi,

I'm running IOS c1700-k9o3sy7-mz.123-3.bin IP/ADSL/FW/IDS PLUS IPSEC 3DES on model 1760 router.

The above configuration is inserted automatically into the running config. When the config is saved and the router rebooted, the config line is rejected (but it remains in the running config)

Any ideas?

Thanks in advance

[#2]

I never find such a command in the config guide or command reference. Not sure why or how you see this.

[crhodes]

I raised a TAC case on this yesterday given no solution from the CCO forum. The Case is E521810 and the initial response from the TAC engineer is the following:

Request for feature was submitted in CSCin46441 - BREAK signal support for SSH . Description : Like telnet SSH doesnt support sending BREAK signal. This is needed when SSH acting like SSH terminal server (reverse SSH). . Request was integrated in 12.3(02.03)B 12.3(01.09)T 012.003(001.009) .

I need to verify if this feature was integrated in 12.3.3 for 1760 let you know the result as soon as possible.