What does this mean. I know that the router has decided to pick the source interface, does SAS, just mean Source Address Station?
3745Metro1#
3745Metro1#debug ipv6 pack det2222:2222:2222:2222:2222:2222:2222:222232debug ipv6 pack det ping ipv6
Target IPv6 address: 2222:2222:2222:2222:2222:2222:2222:2222
Repeat count [5]:
Datagram size [100]:
Timeout in seconds [2]:
Extended commands? [no]:
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 2222:2222:2222:2222:2222:2222:2222:2222, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/1/4 ms
3745Metro1#
3745Metro1#
*Apr 5 16:41:20 BST: IPv6: SAS picked source 6666:6666:6666:6666:6666:6666:6666:6666 for 2222:2222:2222:2222:2222:2222:2222:2222 (FastEthernet1/0)
*Apr 5 16:41:20 BST: IPv6: nexthop 6666:6666:6666:6666:6666:6666:6666:6667,
*Apr 5 16:41:20 BST: IPV6: source 6666:6666:6666:6666:6666:6666:6666:6666 (local)
*Apr 5 16:41:20 BST: dest 2222:2222:2222:2222:2222:2222:2222:2222 (FastEthernet1/0)
*Apr 5 16:41:20 BST: traffic class 0, flow 0x0, len 100+0, prot 58, hops 64, originating
*Apr 5 16:41:20 BST: IPv6: Sending on FastEthernet1/0
*Apr 5 16:41:20 BST: IPV6: source 2222:2222:2222:2222:2222:2222:2222:2222 (FastEthernet1/0)
*Apr 5 16:41:20 BST: dest 6666:6666:6666:6666:6666:6666:6666:6666
*Apr 5 16:41:20 BST: traffic class 0, flow 0x0, len 100+14, prot 58, hops 64, forward to ulp
Many thx indeed.
Ken
