06-13-2003 02:27 AM - edited 03-02-2019 08:07 AM
Dear All,
We are connected to 30 places thru leased line .
Now i wanted to configure ISDN as AutoBackup.
Now problem is here.
If I am configuring place A bri port as a backup of leased line ( it will dial B )then it goes in standby mode.
and B will dial C and C will A.
But if the interface is in standby mode the interface wont comeup.
Suppose link of A is UP but C is down so C will try to dial A but A is in standby mode so it wont accept the call.
Please help me on it as it is really verry imp for me I tried dialer profile and dialer interface but no use.
Mangesh
06-13-2003 04:01 AM
Hello Mangesh,
This problem can also be solved thru floating static routes. When you use these instead of a backup-interface BRI0, the ISDN will not go into standby.
This is an example of a floating static route:
ip route 10.50.111.0 255.255.255.0 10.70.30.215 150
Regards,
Leo
06-13-2003 11:44 PM
Hi leo,
thanx for the suggestion...
can u pls elaborate on it pls....
my serial ip is 10.250 .0.0
Isdn is 10.155.208.0
and ethernet is 10.155.0.0
Mangesh
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide