I must configure our Cisco 2611 Router for Remote Access.
One configuration is for travelling user , they must only dial-in access.
For this i have a solution and this works.
This is the current configuration:
Current configuration:
!
version 12.0
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname styx
!
enable secret 5 $1$/PMt$6T5NUOm3ID05qKK3FrXiU/
!
username jehe password 0 ??
username schorge password 0 ??
username wanieck password 0 ??
ip subnet-zero
isdn switch-type primary-net5
!
!
controller E1 1/0
pri-group timeslots 1-31
!
controller E1 1/1
!
!
interface Ethernet0/0
ip address 172.22.44.91 255.255.0.0
no ip directed-broadcast
!
interface Ethernet0/1
no ip address
no ip directed-broadcast
shutdown
!
interface Serial1/0:15
no ip address
no ip directed-broadcast
encapsulation ppp
no ip route-cache
shutdown
dialer pool-member 1
isdn switch-type primary-net5
no fair-queue
ppp authentication pap
!
interface Dialer1
ip unnumbered Ethernet0/0
no ip directed-broadcast
encapsulation ppp
dialer remote-name jehe
dialer pool 1
dialer-group 1
peer default ip address pool dialin_pool
no cdp enable
!
ip local pool dialin_pool 172.22.44.100 172.22.44.110
ip classless
!
dialer-list 1 protocol ip permit
!
line con 0
transport input none
line aux 0
line vty 0 4
password ??
login
!
end
How i configure a ISDN Callback for our home user?
Please help me.
Thank you and best regards
Claus-Dieter Schorge
