cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
506
Views
0
Helpful
2
Replies

ISDN dialin to a Windows 2000 RAS Server via ppp

whitesnake1965
Level 1
Level 1

Hello,

I tried to dial from my cisco ISDN-Router to a Windows 2000 RAS Server via ppp. But this does not work. Could someone help me ?

User on the Windows 2000 Domain:

Domain-Name: DOMAIN

Servername: SERVER

Username: rasuser

Password: <xxx>

Config:

username DOMAIN\rasuser password <xxx>

username SERVER password <xxx>

interface Dialer11

desc IP of Win 222.222.222.1

ip address 222.222.222.2 255.255.255.252

encapsulation ppp

ip tcp header-compression passive

dialer pool 5

dialer remote-name SERVER

dialer idle-timeout 55

dialer string <xxx>

dialer-group 17

no cdp enable

ppp max-bad-auth 3

ppp encrypt mppe auto

ppp authentication ms-chap callin

ppp chap hostname DOMAIN\rasuser

ppp chap password <xxxx>

ppp pap sent-username DOMAIN\rasuser password <xxxx>

ppp multilink

debu ppp authe

00:03:55: BR0/0 DDR: rotor dialout [best] least recent failure is also most recent

failure

00:03:55: BR0/0 DDR: rotor dialout [best] also has most recent failure

00:03:55: BR0/0 DDR: rotor dialout [best]

00:03:55: BR0/0 DDR: Dialing cause ip (s=222.222.222.2, d=222.222.222.1)

00:03:55: BR0/0 DDR: Attempting to dial <xxxx>.

00:03:257698037759: %LINK-3-UPDOWN: Interface BRI0/0:1, changed state to up

00:03:255592150324: BR0/0:1: interface must be fifo queue, force fifo

00:03:253403070464: %DIALER-6-BIND: Interface BR0/0:1 bound to profile Di11.

00:03:59: BR0/0:1 PPP: Using dialer call direction

00:03:59: BR0/0:1 PPP: Treating connection as a callout

00:03:59: BR0/0:1 PPP: Authorization NOT required

00:03:59: BR0/0:1 PPP: No remote authentication for call-out

00:03:59: BR0/0:1 MS-CHAP-V2: I CHALLENGE id 0 len 27 from "SERVER"

00:03:59: BR0/0:1 MS CHAP V2: Using hostname from interface CHAP

00:03:59: BR0/0:1 MS CHAP V2: Using password from AAA

00:03:59: BR0/0:1 MS-CHAP-V2: O RESPONSE id 0 len 70 from "DOMAIN\rasuser"

00:03:59: BR0/0:1 MS-CHAP-V2: I FAILURE id 0 len 52 msg is "E=691 R=1 C=DCA4

74AB06BD60360E5D1ADF6E43EB3D V=3".

00:04:01: BR0/0:1 MS-CHAP-V2: I FAILURE id 0 len 52 msg is "E=691 R=1 C=DCA4

74AB06BD60360E5D1ADF6E43EB3D V=3".

00:04:03: BR0/0:1 MS-CHAP-V2: I FAILURE id 0 len 52 msg is "E=691 R=1 C=DCA4

74AB06BD60360E5D1ADF6E43EB3D V=3"

00:04:05: %ISDN-6-CONNECT: Interface BRI0/0:1 is now connected to 0911960639

9 0008.c784.5b3a.

Success rate is 0 percent (0/5)

00:04:05: BR0/0:1 MS-CHAP-V2: I FAILURE id 0 len 52 msg is "E=691 R=1 C=DCA4

74AB06BD60360E5D1ADF6E43EB3D V=3"

00:04:07: BR0/0:1 MS-CHAP-V2: I FAILURE id 0 len 52 msg is "E=691 R=1 C=DCA4

74AB06BD60360E5D1ADF6E43EB3D V=3"

00:04:09: BR0/0:1 MS-CHAP-V2: I FAILURE id 0 len 52 msg is "E=691 R=1 C=DCA4

74AB06BD60360E5D1ADF6E43EB3D V=3"

00:04:09: BR0/0:1 AUTH: Timeout 1

00:04:11: BR0/0:1 MS-CHAP-V2: I FAILURE id 0 len 52 msg is "E=691 R=1 C=DCA4

74AB06BD60360E5D1ADF6E43EB3D V=3"

00:04:13: BR0/0:1 MS-CHAP-V2: I FAILURE id 0 len 52 msg is "E=691 R=1 C=DCA4

74AB06BD60360E5D1ADF6E43EB3D V=3"

00:04:15: BR0/0:1 MS-CHAP-V2: I FAILURE id 0 len 52 msg is "E=691 R=1 C=DCA4

74AB06BD60360E5D1ADF6E43EB3D V=3"

00:04:17: BR0/0:1 MS-CHAP-V2: I FAILURE id 0 len 52 msg is "E=691 R=1 C=DCA4

74AB06BD60360E5D1ADF6E43EB3D V=3

2 Replies 2

smahbub
Level 6
Level 6

From the debug output I guess there is some authentication problem. Please check that.

I think your right. But I don't see where is the problem. I've tested it with a bintec router and the same settings, all works fine. I also think, it must be a authentication problem, but I don't the my mistake.