HI,
We have a BladeCenter which has a internal switch IGESM (version 12.1(22)EA6a).
the IGESM internal side connects some blade servers.
IGESM external side connects a distribution server.
"
bladeserver <--> bladeswitch <--> distribution server
"
when bootup, the bladeserver need to get it's IP(via DHCP) and image from the distribution server.
Now the problem is as soon as the bladeserver get the IP address, the line protocol on the bladeswitch is flapping and then the port was error-disabled as link flap.
My question is why the line protocol is flapping? (AS I know, after the line protocol had been negotiated between bladeserver and bladeswitch, the status would be stable.) Please give me some tips about it.
Here is the logging message:
"
Apr 13 15:28:29.198 CHN: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/10, changed state to down
Apr 13 15:28:35.430 CHN: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/10, changed state to up
Apr 13 15:28:38.222 CHN: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/10, changed state to down
Apr 13 15:28:41.322 CHN: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/10, changed state to up
"
Thank you very much!
Regards,
Sha
