%LINK-3-UPDOWN: SIP0/0: Interface & %LINK-3-UPDOWN: Interface

TATSUO YAMADA · ‎08-01-2014

In show logging , Does anyone knows the differences shown below.

Platform is ASR1002

sample1: Jul 3 22:36:02.914 JST: %LINK-3-UPDOWN: Interface...

sample2: Jul 4 07:35:20.676 JST: %LINK-3-UPDOWN: SIP0/0: Interface...

And there are one more Incredibles.

these sample logs were in real bootup log and points same interfece (gig0/0/2) but it's indicates different tmies !

I already use NTP server.

anyone knows why times are differ? Are there configurations or commans for sycronize it ?

thanks.

Leo Laohoo · ‎08-01-2014

I don't see anything wrong with the time-stamps, Tatsuo-san. Sample 1 occurred on 10:36pm, 03 July Japan time and Sample 2 occurred on 7:35am, 04 July Japan time.

TATSUO YAMADA · ‎08-03-2014

thenks for your responce, Leo-san.

another part of log is below. SIP tmestamp returnes Jul4 to Jul 3.

Jul 3 22:36:02.914 JST: %LINK-3-UPDOWN: Interface GigabitEthernet0/0/2, changed state to up
Jul 3 22:36:03.088 JST: %LINEPROTO-5-UPDOWN: Line protocol on Interface Tunnel216, changed state to up
Jul 3 22:36:03.185 JST: %LINK-3-UPDOWN: Interface GigabitEthernet0/1/2, changed state to up
Jul 3 22:36:03.360 JST: %LINK-3-UPDOWN: Interface GigabitEthernet0/1/4, changed state to up
Jul 3 22:36:03.487 JST: %LINEPROTO-5-UPDOWN: Line protocol on Interface Tunnel301, changed state to up
Jul 3 22:36:03.576 JST: %LINK-3-UPDOWN: Interface GigabitEthernet0/1/6, changed state to up
Jul 3 22:36:03.749 JST: %TRACKING-5-STATE: 4 interface Gi0/1/3 line-protocol Down->Up
Jul 3 22:36:03.749 JST: %TRACKING-5-STATE: 6 interface Gi0/1/5 line-protocol Down->Up
Jul 3 22:36:03.749 JST: %TRACKING-5-STATE: 8 interface Gi0/1/7 line-protocol Down->Up
Jul 3 22:36:03.899 JST: %LINEPROTO-5-UPDOWN: Line protocol on Interface Tunnel302, changed state to up
Jul 4 07:35:20.676 JST: %LINK-3-UPDOWN: SIP0/0: Interface GigabitEthernet0/0/2, changed state to up
Jul 3 22:36:03.999 JST: %LINEPROTO-5-UPDOWN: Line protocol on Interface Tunnel303, changed state to up
Jul 3 22:36:04.093 JST: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/0/2, changed state to up
Jul 4 07:35:20.926 JST: %LINK-3-UPDOWN: SIP0/1: Interface GigabitEthernet0/1/2, changed state to up

Leo Laohoo · ‎08-03-2014

I have never seen this behaviour before, Tatsuo-san.

Do you see this on a "sh log" or from a syslog server?

I am suspecting it could be an IOS-XE bug.

TATSUO YAMADA · ‎08-04-2014

thanks Leo-san,

this on a "sh logg".

now I'm guessing SIP has another clock. and Synconise separately.

or IOS-XE bug.

Leo Laohoo · ‎08-04-2014

Tatsuo-san,

If you can upgrade the IOS, try it.