04-23-2003 04:06 PM - edited 03-02-2019 06:51 AM
I have a 3725 with 2 T1csu/dsu, I would like tto bundle rhe 2 ti's tto make
it look like a 3mb pipe, I used the example cisco had and as soon as i put
the encap frame=relay on the 2nd ti the first ti went down, Any help would
be appreciated.
Thanks
Dennis
04-29-2003 12:03 PM
The following configuration will solve your bundling T1 in frame-relay
interface serial 2
no ip address
encapsulation frame-relay
frame-relay lmi-type ansi
!
interface serial 2.1 point-to-point
frame-relay interface-dlci 32 ppp virtual-template1
!
interface Virtual-Template1
ip unnumbered ethernet 0
ppp authentication chap pap
And also check the link
http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/120newft/120t/120t1/pppframe.htm
04-29-2003 03:14 PM
Make sure your provider supports MFR on his frame swich.
check this URL for sample configuration.
thanks
Suresh
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide