10-28-2003 08:32 AM - edited 03-02-2019 11:18 AM
I have 2 CISCO 805 routers connected via a 56K DDS. I can ping each S0 and each EO accross the 56K circuit. The Corporate router can ping hosts on the Warehouse routers E0 but the Warehouse router can't ping hosts on the Corporate router's EO. Here is the configs:
****Warehouse router:
warehouse#wr t
Building configuration...
Current configuration : 748 bytes
!
version 12.2
no service pad
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname warehouse
!
enable secret xxxx
enable password xxxx
!
ip subnet-zero
!
!
!
!
interface Ethernet0
ip address 192.168.99.1 255.255.255.0
no ip mroute-cache
!
interface Serial0
no ip address
encapsulation frame-relay
no ip mroute-cache
no fair-queue
!
interface Serial0.1 point-to-point
description ISP
ip address 10.0.0.1 255.255.255.0
no ip mroute-cache
frame-relay interface-dlci 16
!
ip classless
ip route 192.168.16.0 255.255.255.0 10.0.0.2
ip http server
ip pim bidir-enable
!
!
!
line con 0
exec-timeout 0 0
stopbits 1
line vty 0 4
password xxx
login
!
end
warehouse#
****Corporate Router
corporate#wr t
Building configuration...
Current configuration : 730 bytes
!
version 12.2
no service pad
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname corporate
!
enable secret xxxx
enable password xxxx
!
ip subnet-zero
!
!
!
!
interface Ethernet0
ip address 192.168.16.1 255.255.255.0
no ip mroute-cache
!
interface Serial0
no ip address
encapsulation frame-relay
no ip mroute-cache
no fair-queue
!
interface Serial0.1 point-to-point
description ISP
ip address 10.0.0.2 255.255.255.0
no ip mroute-cache
frame-relay interface-dlci 16
!
ip classless
ip route 192.168.99.0 255.255.255.0 10.0.0.1
ip http server
ip pim bidir-enable
!
!
!
line con 0
stopbits 1
line vty 0 4
password xxxx
login
!
end
corporate#
Thanks!!
Solved! Go to Solution.
10-28-2003 07:40 PM
When the warehouse router pings hosts off corporate router E0, 10.0.0.1 is used as the source address. Make sure that these hosts can reach this address either using a specific or default route.
10-28-2003 08:58 AM
Can the warehouse router ping the E0 of the corporate router ? If so you have proven that you have a route to the dest network . If this is so check the gateways of the clients on the ethernet segment of the corporate router.
Another thing you can do is from the corporate router ping hosts on the ethernet segment but source your pings from s0.1 if pings fail the clients gateways are set incorrectly .
10-29-2003 07:25 AM
***Fixed***. It was the gateway on the clients. Once I set the right gateway I could ping and everything worked perfectly.
10-28-2003 07:40 PM
When the warehouse router pings hosts off corporate router E0, 10.0.0.1 is used as the source address. Make sure that these hosts can reach this address either using a specific or default route.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide