PIX 501 behind SOHO 97 VPN

[breilly]

I am trying to setup vpn access to the pix 501 (6.34) behind the SOHO 97 (12.4)...from the vpn client, I can establish the ike policies, but right after user authentication it fails at isakmp, starts to retransmit...any suggestions

The soho is set to route all traffic to the pix

ip nat inside source static PIXExternalInt interface Dialer1

[r-simpson]

This document illustrates two Cisco Secure PIX Firewall devices running a simple VPN tunnel from PIX 1 to PIX 2 over a public network using IPSec. A Cisco VPN Client 4.x connects to PIX 1. The configuration uses pre-shared keys (wild-cards for the clients' IPs), and mode configuration for the clients.

Note: The VPN Client can access the LAN behind PIX 1 but not the LAN behind PIX 2. The PIX does not redirect traffic

http://www.cisco.com/warp/public/110/pixpixvpn.html