cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
252
Views
0
Helpful
1
Replies

Reselling DSL

tom_parker
Level 1
Level 1

We are currently working on reselling DSL services from a provider and our primary engineer is out of country. The provider is providing an ATM link to our equipment. The problem I'm having is finding information on customer provisioning and also how to configure the links in the router back to the customer. If anyone has any insight or experience on providing authentication, addressing, etc it would be very appreciated. My onsite equipment is a 2600 series router with a 4port ATM/IMA card. Can I do all of the provision through it? Thank you.

1 Reply 1

vmoopeung
Level 5
Level 5

You can use a radius or TACAS server for authenication and a DHCP server for addressing dynamically even this can be enabled on the router it self depending on the load of the router.

http://www.cisco.com/en/US/tech/tk583/tk547/technologies_white_paper09186a00800a3c92.shtml

http://www.cisco.com/en/US/tech/tk583/tk547/technologies_tech_note09186a0080094e99.shtml