12-30-2003 04:20 AM - edited 03-02-2019 12:36 PM
Dear All,
We want to setup WAN network with one Central Location and 19 Remote location in a star topology.
Central site router config:-1) cisco 3745 router
2) 1 portChannelized E1/T1 card for leased line to remote locations.
3) NM-HDV-E1-30 digital voice trunk module.
4) NM-4B-S/T card for ISDN dial backup.
Remote Site router config for 5 Locations :-1) cisco 1751-v router
2)WIC-2A/S for lease,WIC-1B-S/T for ISDN backup
3)VIC-2FXS
Remote site router config for remaining 14 Locations :- 1) cisco 1751-v router
2)WIC-2A/S for lease
3)VIC-2FXS for VOIP
Idea is to form a WAN data and voice network to run SAP application.
Primary media for all location will be Lease line.
ISDN backup will be used only at 5 locations as backup media.
Central location will have a PBX connected back to back to E1 network module (NM-HDV-E1-30) to support incoming voice calls from remote locations.
Posting the sample config for central location and one remote location
kindly verify whether this will work or any change is required.
Any suggestions regarding which routing protocol to be used or any other configuration related suggestions is welcomed.
Thanks
Router Configuration for Central Site:-
hostname central
!
logging buffered 4096 debugging
logging rate-limit console 10 except errors
enable password cisco
!
username r1 password cisco
username r2 password cisco
username r3 password cisco
username r4 password cisco
username r5 password cisco
voice-card 1
ip subnet-zero
no ip finger
isdn switch-type primary-qsig
controller E1 3/0
clock source internal
pri-group timeslots 1-30,16
controller E1 1/1
framing NO-CRC4
channel-group 0 timeslots 31
channel-group 1 timeslots 1
channel-group 2 timeslots 2
channel-group 3 timeslots 3
channel-group 4 timeslots 4
channel-group 5 timeslots 5
channel-group 6 timeslots 6
channel-group 7 timeslots 7
channel-group 8 timeslots 8
channel-group 9 timeslots 9
channel-group 10 timeslots 10
channel-group 11 timeslots 11
channel-group 12 timeslots 12
channel-group 13 timeslots 13
channel-group 14 timeslots 14
channel-group 15 timeslots 15
channel-group 16 timeslots 16
channel-group 17 timeslots 17
channel-group 18 timeslots 18
channel-group 19 timeslots 19
channel-group 20 timeslots 20
channel-group 21 timeslots 21
channel-group 22 timeslots 22
channel-group 23 timeslots 23
channel-group 24 timeslots 24
channel-group 25 timeslots 25
channel-group 26 timeslots 26
channel-group 27 timeslots 27
channel-group 28 timeslots 28
channel-group 29 timeslots 29
channel-group 30 timeslots 30
interface Serial1/1:0
description <<<64Kbps Link to r1 >>>
ip address 192.16.4.1 255.255.255.252
no ip directed-broadcast
encapsulation ppp
no shutdown
fair-queue 64 256 0
interface FastEthernet0/0
description *** Connected to Local LAN at central ***
ip address 172.16.0.1 255.255.252.0
no ip redirects
no ip unreachables
no ip proxy-arp
no shutdown
speed 100
full-duplex
!
interface Serial3/0:15
no ip address
no logging event link-status
no snmp trap link-status
isdn switch-type primary-qsig
isdn overlap-receiving
isdn protocol-emulate network
isdn incoming-voice voice
no isdn T309-enable
isdn T310 60000
isdn contiguous-bchan
isdn bchan-number-order ascending
no cdp enable
!
interface BRI2/0
description *** ISDN BACKUP for r1 ***
no ip address
encapsulation ppp
dialer pool-member 1
isdn switch-type basic-net3
no cdp enable
ppp authentication chap
!
interface BRI2/1
description *** ISDN BACKUP for r2 ***
no ip address
encapsulation ppp
dialer pool-member 1
isdn switch-type basic-net3
no cdp enable
ppp authentication chap
!
interface BRI2/2
description *** ISDN BACKUP for r3 ***
no ip address
encapsulation ppp
dialer pool-member 1
isdn switch-type basic-net3
no cdp enable
ppp authentication chap
interface BRI2/3
description *** ISDN BACKUP for r4 ***
no ip address
encapsulation ppp
dialer pool-member 1
isdn switch-type basic-net3
no cdp enable
ppp authentication chap
interface Dialer1
description Dialer Interface for r1
ip address 192.17.4.1 255.255.255.252
encapsulation ppp
dialer pool 1
dialer remote-name r1
dialer string (ISDN NUMBER r1)
dialer-group 1
no cdp enable
ppp authentication chap
interface Dialer2
description Dialer Interface for r2
ip address 192.17.5.1 255.255.255.252
encapsulation ppp
dialer pool 1
dialer remote-name r2
dialer string (ISDN NUMBER of r2)
dialer-group 1
no cdp enable
ppp authentication chap
interface Dialer3
description Dialer Interface for r3
ip address 192.17.6.1 255.255.255.252
encapsulation ppp
dialer pool 1
dialer remote-name r3
dialer string (ISDN NUMBER of r3)
dialer-group 1
no cdp enable
ppp authentication chap
interface Dialer4
description Dialer Interface for r4
ip address 192.17.7.1 255.255.255.252
encapsulation ppp
dialer pool 1
dialer remote-name r4
dialer string (ISDN NUMBER of r4)
dialer-group 1
no cdp enable
ppp authentication chap
interface Dialer5
description Dialer Interface for r5
ip address 192.17.8.1 255.255.255.252
encapsulation ppp
dialer pool 1
dialer remote-name r5
dialer string (ISDN NUMBER for r5)
dialer-group 1
no cdp enable
ppp authentication chap
!
no ip http server
voice-port 3/0:15
cptone IN
!
dial-peer voice 220 pots
destination-pattern 220..
port 3/0:15
dial-peer voice 260 voip
destination-pattern 260.
session target ipv4:172.16.4.1
!
router rip
version 2
network 192.16.0.0
network 192.17.0.0
network 172.16.0.0
ip route 172.16.4.0 255.255.255.0 Dialer1 200
access-list 101 deny udp any any eq rip
access-list 101 permit ip any any
dialer-list 1 protocol ip list 101
end
Router Configuration for Remote Site
Router Configuration for r1
hostname r1
!
enable password cisco
!
username central password cisco
ip subnet-zero
isdn switch-type basic-net3
!
interface Ethernet0
ip address 172.16.4.1 255.255.255.0
no ip directed-broadcast
no shutdown
interface Serial0
backup delay 5 10
backup interface Dialer0
ip address 192.16.4.2 255.255.255.252
no ip directed-broadcast
no shutdown
encapsulation ppp
!
interface BRI0
description <<<<connection to central site>>>>
no ip address
no ip directed-broadcast
encapsulation ppp
dialer pool-member 1
isdn switch-type basic-net3
ppp authentication chap
no shutdown
!
interface Dialer0
ip address 192.17.4.2 255.255.255.252
no ip directed-broadcast
encapsulation ppp
dialer remote-name central
dialer string ISDN NUMBER 1 of central
dialer string ISDN NUMBER 2 of central
dialer string ISDN NUMBER 3 of central
dialer string ISDN NUMBER 4 of central
dialer pool 1
dialer-group 1
ppp authentication chap
!
voice-port 2/0
description connected to phone (2600)
voice-port 2/1
description connected to phone (2601)
dial-peer voice 2600 pots
destination-pattern 2600
port 2/0
dial-peer voice 2601 pots
destination-pattern 2601
port 2/1
dial-peer voice 220 voip
destination-pattern 220..
session target ipv4:172.16.0.1
vad
ip precedence 5
router rip
version 2
network 192.16.0.0
network 192.17.0.0
network 172.16.4.0
!
ip classless
ip route 0.0.0.0 0.0.0.0 Dialer0
!
access-list 101 deny udp any any eq rip
access-list 101 permit ip any any
dialer-list 1 protocol ip list 101
!
line con 0
transport input none
line vty 0 4
password cisco
!
end
Router configuration for all other remote site is same except for IP addressing.
01-05-2004 08:50 AM
The configuration is fine, for more availablity you can use another CE1 card as back up instead of the 4 BRI S/T. then check out whether "channel-group 15 timeslots 15 " command works b'coz it indicates D channel.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide