cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
280
Views
0
Helpful
1
Replies

Routing problem 7500 and 2 x 6509 with MSFC's

msjouw
Level 1
Level 1

Hi,

We have a strange issue where on 2 locations we have a 7500 and a 6509 each both sites are connected to each other by MAN (2GB on the 6509) and WAN (OC3 on the 7500) the 7500 and the 6509's are interconnected by 100Mb interfaces. Now we have on site A a OC3 to another site this other site is our gateway of last resort.

On site B we have other links coming in and when we try to connect from one of those sites to a site that is not in the routing table it looses smoe packets before it connects. the main route for this is:

remote site -> site B 7500 -> site B 6509 MSFC -> site A 6509 MSFC -> site A 7500 -> site with the host

Routing Protocol used: EIGRP

Anybody encountered this type of losses on this type of connection?

Regards, Maarten Sjouw.

1 Reply 1

rjackson
Level 5
Level 5

try a trace route and see if it gives you any hints about where the packets are being lost.

Review Cisco Networking for a $25 gift card