07-21-2004 01:20 AM - edited 03-02-2019 05:12 PM
We have the following on the remote end
interface Serialx/0/1:1
no ip address
no ip redirects
no ip directed-broadcast
no ip proxy-arp
encapsulation frame-relay IETF
no fair-queue
frame-relay traffic-shaping
frame-relay lmi-type ansi
frame-relay intf-type dce
!
interface Serialx/0/1:1.1 point-to-point
bandwidth 1984
ip address x.x.x.1 x.x.x.x.
no ip redirects
no ip directed-broadcast
no ip proxy-arp
no arp frame-relay
no cdp enable
frame-relay interface-dlci 16
and on the local end
inteface serial 0/0
bandwidth 1984
ip address x.x.x.2 x.x.x.x
no ip directed-broadcast
no ip mroute-cache
Please how do I configure the local end to correspond with the remote end as it is showing
Interface serial up, line protocol down.
Thanks for your help.
07-21-2004 04:10 AM
Hello,
on your local end, try and configure the following:
interface serial 0/0
encapsulation frame-relay ietf
bandwidth 1984
no ip address
no ip directed-broadcast
no ip mroute-cache
!
interface serial 0/0.1 point-to-point
bandwidth 1984
ip address x.x.x.2 x.x.x.x
no ip directed-broadcast
no ip mroute-cache
frame-relay lmi-type ansi
frame-relay interface-dlci 16
Is the remote end being used as the frame-relay switch ? Try and add the command:
clock rate XXXXX
to the serial interface on the remote end, where XXXXX is the transmission rate desired (e.g. 64000, 125000, 250000). Also, if the remote end functions as a frame-relay switch, add the global command:
frame-relay switching
Let me know if this works.
Regards,
GP
07-21-2004 05:37 AM
Thanks
If the remote end is being used as a frame-relay switch, will I still need to ass the clock rate and frame-relay switching on my local end?
Thanks
07-21-2004 06:33 AM
Hello,
no, in that case you just need to configure it on the remote end, both clock rate and the frame-relay switching command.
HTH,
GP
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide