Serial interface

[Maxim Zimovets]

Hello,

Today I got following error in log:

Feb 24 10:34:17.991 YEKST: ******** Status Zero Condition Encountered ******

Feb 24 10:34:17.991 YEKST: RX Ring After delay: Head = B5E15C0, recv_status = 0

Feb 24 10:34:17.991 YEKST: ******** Status Zero Condition Encountered ******

Feb 24 10:34:17.991 YEKST: RX Ring After delay: Head = B5F6C70, recv_status = 0

Feb 24 10:34:17.991 YEKST: ******** Status Zero Condition Encountered ******

Feb 24 10:34:17.991 YEKST: RX Ring After delay: Head = B5F6C70, recv_status = 0

Feb 24 10:34:17.991 YEKST: ******** Status Zero Condition Encountered ******

Feb 24 10:34:17.991 YEKST: RX Ring After delay: Head = B5E15C0, recv_status = 0

Feb 24 10:34:17.991 YEKST: ******** Status Zero Condition Encountered ******

Feb 24 10:34:17.991 YEKST: RX Ring After delay: Head = B5E15C0, recv_status = 0

Feb 24 10:34:17.991 YEKST: ******** Status Zero Condition Encountered ******

Feb 24 10:34:17.991 YEKST: RX Ring After delay: Head = B5F6C70, recv_status = 0

Feb 24 10:34:17.991 YEKST: ******** Status Zero Condition Encountered ******

Feb 24 10:34:17.991 YEKST: RX Ring After delay: Head = B5F6C70, recv_status = 0

It that time there were problems with connectivity on one of Serial interfaces (Interface

went down and up several times).

Search through cisco.com gave me nothing. Can anybody explain me what it's all about?

Cheers

Maxim

[umedryk]

You could do a hard loop test http://www.cisco.com/en/US/tech/tk713/tk628/technologies_tech_note09186a00800a754b.shtml