07-27-2005 10:11 PM - edited 03-02-2019 11:32 PM
4506#sh ver
Cisco Internetwork Operating System Software
IOS (tm) Catalyst 4000 L3 Switch Software (cat4000-I9K2S-M), Version 12.1(19)EW2, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2005 by cisco Systems, Inc.
Compiled Fri 15-Apr-05 19:56 by alnguyen
Image text-base: 0x00000000, data-base: 0x01025154
ROM: 12.2(20r)EW1
Dagobah Revision 86, Swamp Revision 29
4506 uptime is 16 hours, 3 minutes
System returned to ROM by power-on
System restarted at 22:46:07 GMT+9 Wed Jul 27 2005
System image file is "bootflash:"
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
cisco WS-C4506 (XPC8245) processor (revision 7) with 524288K bytes of memory.
Processor board ID FOX091400MT
Last reset from PowerUp
68 Gigabit Ethernet/IEEE 802.3 interface(s)
403K bytes of non-volatile configuration memory.
Configuration register is 0x2101
4506#dir
4506#dir a
4506#dir all-filesystems
Directory of bootflash:/
1 -rw- 9604052 Jun 27 2005 02:42:06 cat4000-i9k2s-mz.121-19.EW2.bin
61341696 bytes total (51737516 bytes free)
Directory of crashinfo:/
1 -r-- 95 <no date> data
2 -r-- 81916 <no date> data.bin
No space information available
Directory of cat4000_flash:/
1 -rw- 760 <no date> vlan.dat
760 bytes total (0 bytes free)
Directory of nvram:/
%Error opening nvram:/ (Device or resource busy)
413676 bytes total (410404 bytes free)
Directory of system:/
2 dr-x 0 <no date> memory
1 -rw- <no size> <no date> running-config
9 dr-x 0 <no date> vfiles
No space information available
Directory of profiler:/
1 -r-- 0 <no date> data
No space information available
now register Configuration register is 0x2101
if register setting problem, change 0x2102 . ?
Directory of nvram:/
%Error opening nvram:/ (Device or resource busy)
nvram does not exist file (errror message resorece busy)
what proble happen ?
07-27-2005 11:06 PM
Hello,
check if, for some reason, another user or line is still active on the device, have a look at the document below for details:
Problems Caused by Simultaneous Access to Router NVRAM
http://www.cisco.com/en/US/products/sw/iosswrel/ps1833/products_tech_note09186a0080202612.shtml
Regards,
GP
07-28-2005 12:54 AM
if copy run start and wr command excute
, do not display screen (system normal,but screen not display).
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide