Subnetting

[1pgordo]

The acquired building consists of a reception department and an administration + management department. After consulting with the team, designed the following layout. After some minor adjustments, our our technical department to install the hardware devices listed below. These should now be fully configured. Firt Floor: Wired lan: x.x.x.x//16 Wireless Lan Controller: On this device we create 3 Vlans for the networks below. 1. 802.11 visitors x.x.x/24 2. 802.11 employees x.x.x.x/24 3. 802.11 management x.x.x.x/28  Printer First Floor has a fixed IP Private AP 192.168.0.0/30 SSID should NOT be visible. My start ip for the first floor is 192.110.x.x./16 Could someone help me with just subnetting?

[Ruben Cocheno]

@1pgordo 

 Just as example

Wired LAN: 192.110.1.0/24 (for example)

802.11 Visitors: 192.110.2.0/24

802.11 Employees: 192.110.3.0/24

802.11 Management: 192.110.4.0/28

Private AP: 192.168.0.0/30 (using 192.168.0.1 for AP and 192.168.0.2 for the other end)

Printer First Floor: 192.110.5.5 (for example)