switchport trunk native vlan & switchport access vlan dual configuration

[rob_bourne]

I've discovered this dual configuration on a 3500xl switch while troubleshooting an incrementing runts issue. Could the config of this port be related to the issue at hand?

port configuration:

interface FastEthernet0/3

duplex full

speed 100

switchport access vlan 203

switchport trunk encapsulation dot1q

switchport trunk native vlan 203

switchport trunk allowed vlan 1,203,204,220,1002-1005

switchport mode trunk

spanning-tree portfast

[pkhatri]

Hi,

The 'switchport access vlan' command will have no effect on the configuration you have on this port. The port will operate as a trunk and will dis-regard any config that pertains to an access port.

Hope that helps ...

Paresh

[rob_bourne]

ok, thankyou