cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
668
Views
0
Helpful
3
Replies

tftp broadcasts

cuttressb
Level 1
Level 1

We have C2900XL and C3500XL switches and I am seeing tftp brodcasts from the switches on our sniffer.

TFTP Read Request File = network-config

Do I have to disable TFTP on the switch or is something configured wrong? Does this have to do with the configuration of the DHCP server?

3 Replies 3

7rbowenii
Level 3
Level 3

Default setting for some switches is to broadcast through the network for their config file. This is contolled by the configuration registry. If you do a sho ver on your switch, the conf reg value will be displayed near the bottom. Post this, and we can check to see if this is the problem.

-Bo

Here is the registry value.

Configuration register is 0xF

IOS (tm) C2900XL Software (C2900XL-C3H2S-M), Version 12.0(5.2)XU, MAINTENANCE IN

TERIM SOFTWARE

Will the IOS upgrade fix this?????

The conf reg appears correct. I would check the caveats of the code you are using/going to use to determine whether or not this is a reported issue.

-Bo

Review Cisco Networking for a $25 gift card