Hello,
The "show int tunnel 1" command shows the following output:
Tunnel1 is up, line protocol is up
Hardware is Tunnel
Internet address is xxx.xxx.xxx.xxx 255.255.255.252
MTU 1514 bytes, BW 9 Kbit, DLY 500000 usec,
reliability 255/255, txload 1/255, rxload 154/255
....
My question now. Is the BW parameter (9 KBit) for the routing process (routing table) only or is there another meaning, a kind of traffic shaping e.g. ?
Is the rxload 154/255 a problem ?
Thanks
Mathias