Two link E1 With Alcatel

[kingstdz]

Hi

We have gateway cisco with card e1 with two port e1 one is connected with alcatel 1 and we have recently add second likn e1 with alcatel 2 how to use those link when user call it can route call via those.

Actually gateway is using one port to inbound and outbound call.

Thanks

[Georg Pauwen]

Hello,

what do you want to accomplish, load-sharing/loaf-balancing ? A potential solution depends on the actual configuration and e.g. the routing (protocols) in use. Can you post the current running configuration ?

[kingstdz]

Thanks problem resolved with dial peer for each serial of card pri e1 (load balancing with order of dial peer up down), if you can post doc of sharing i ll apreciate

Thanks