Upgraded 1601 Flash and having trouble loading IOS

[gbrome]

I upgraded my 1601 router FLASH using new 16MB flash card. I have a valid system image loaded onto flash, but can't seem to get it to load, and it goes to the boot helper instead.

Thans!

george

[thisisshanky]

What message do you get when you type "i" or initialize the image in flash. Type "i" in the boothelper mode, and press enter.

Get back with the output.

[lgijssel]

That not too much info. Can you boot it manually?

Could you upload a screen copy of the boot sequence?

[deilert]

try adding boot system commands

i.e.

not sure of the syntax it varies from IOS rev & hardware.

boot system flash slot0:image name

or

boot system slot0:image name

[deilert]

try adding boot system commands

i.e.

not sure of the syntax it varies from IOS rev & hardware.

boot system flash slot0:image name

or

boot system slot0:image name

[gbrome]

Thanks,

I really appreciate the responses. I am trying to upgrade a 1601 in order to install a WIC1ENET card, but it appears the 1601 does not support this. I guess I'll have to use a 1720 instead.