01-18-2005 08:30 AM - edited 03-02-2019 09:08 PM
Can anyone tell me where I can find instructions on how to do upgrade my 3750 as I need to put 12.2(20)SE3 on it.
many thanks
Solved! Go to Solution.
01-18-2005 08:41 AM
Here are the release notes for 12.2(20)SE, bookmarked at the installation instructions:
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat3750/12220se/ol554701.htm#wp559616
Kevin Dorrell
Luxembourg
01-18-2005 08:41 AM
Here are the release notes for 12.2(20)SE, bookmarked at the installation instructions:
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat3750/12220se/ol554701.htm#wp559616
Kevin Dorrell
Luxembourg
01-18-2005 08:46 AM
Hi,
Do you have a TFTP server, if not you can download one from Cisco and install it onto your PC.
I normally use 3cdaemon from 3com which you can google for.
You need to configure your TFTP server to listen to a directory on your PC and then copy the switch image to this directory.
*Also you need to be able to route from your PC to your switch, unless you can connect your PC into the same vlan as your switch management interface*
Other than that follow the release notes as mentioned by kevin
Good luck
Paddy
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide