cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
320
Views
0
Helpful
1
Replies

VLAN Routing is slow

mike.scaggs
Level 1
Level 1

Hello everyone

I have a network with 4 VLANS. The switches are 2980s and 3640 router routing my VLANS. When a user accesses a server on his same subnet all is good. However, when a user from a different VLAN from the server accesses the same file it is all very slow. The router is setup with an 802.1q trunk (100Mb) to the switches. The routers CPU load is very low.

How do I trouble shoot this issue?

Mike

1 Reply 1

ciscomoderator
Community Manager
Community Manager

Often times complex troubleshooting issues are best addressed in an interactive trouble-shooting session with one of our trained technical assistance engineers. While other forum users may be able to help, it’s often difficult to do so for this type of issue.

To utilize the resources at our Technical Assistance Center, please visit http://www.cisco.com/tac and to open a case with one of our TAC engineers, visit http://www.cisco.com/tac/caseopen

If anyone else in the forum has some advice, please reply to this thread.

Thank you for posting.

Quick Links
<