Greetings!
Im trying to establish a wifi-bridge with 2 APs for same days now.
The APs Model is AP 1532E-UXK9.
One of em is configured as the root-ap which the WGB is supposed to associate with.
It worked the first time i tested it with this guide here >>click<<.
I could ping, get an ip and access all hosts over the wifi-bridge.
Jet somehow the APs wont connect again, even though i do exactly what i did before.
I managed to get them working a second time yesterday, but as soon as i restarted the WGB it wont connnect anymore.
Im sure i can get them to connect again by resetting them completely and start over, but everytime i change anything after that, like adding WPA, the APs wont connect again.
Even when i change the settings back they wont connect.
The error message states simply:
DOT11-4-CANT_ASSOC: Interface Dot11Radio1, cannot associate: No Response
I hope you can help me out here, i really dont know what to try anymore.
Here is the config of the root-AP and WGB below it:
____________________________________________________________
root-AP
____________________________________________________________
Current configuration : 2143 bytes
!
! Last configuration change at 07:55:50 UTC Wed May 3 2017
! NVRAM config last updated at 07:35:23 UTC Wed May 3 2017
! NVRAM config last updated at 07:35:23 UTC Wed May 3 2017
version 15.3
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
!
hostname ap
!
!
logging rate-limit console 9
enable secret 5 $1$yu8P$AJMePIFfywkhiLY79e/Xs0
!
no aaa new-model
no ip source-route
no ip cef
!
!
!
!
dot11 syslog
!
dot11 ssid Cisco
vlan 5
authentication open
!
dot11 ssid GB-MAST
infrastructure-ssid
!
!
!
!
!
username CISCO password 7 1531021F0725
!
!
bridge irb
!
!
!
interface Dot11Radio0
no ip address
!
encryption mode ciphers aes-ccm
antenna gain 0
packet retries 64 drop-packet
station-role root
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 spanning-disabled
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
!
interface Dot11Radio1
no ip address
!
ssid Cisco
!
antenna gain 0
peakdetect
no dfs band block
packet retries 64 drop-packet
channel dfs
station-role root
infrastructure-client
!
interface Dot11Radio1.5
encapsulation dot1Q 5 native
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 spanning-disabled
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
!
interface GigabitEthernet0
no ip address
duplex auto
speed auto
!
interface GigabitEthernet0.5
encapsulation dot1Q 5 native
bridge-group 1
no bridge-group 1 source-learning
!
interface GigabitEthernet1
no ip address
duplex auto
speed auto
bridge-group 1
bridge-group 1 spanning-disabled
no bridge-group 1 source-learning
!
interface BVI1
mac-address 00d7.8f6a.3ea2
ip address dhcp client-id GigabitEthernet0
ipv6 address dhcp
ipv6 address autoconfig
ipv6 enable
!
ip forward-protocol nd
ip http server
no ip http secure-server
ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
!
!
bridge 1 route ip
!
!
!
line con 0
line vty 0 4
login local
transport input all
!
end
____________________________________________________________
WGB
____________________________________________________________
Current configuration : 1763 bytes
!
! Last configuration change at 00:19:34 UTC Mon Mar 1 1993
version 15.3
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
!
hostname ap
!
!
logging rate-limit console 9
enable secret 5 $1$nYug$ceeK1j/VWH3BW6WPf.KSg0
!
no aaa new-model
no ip source-route
no ip cef
!
!
!
!
dot11 syslog
!
dot11 ssid Cisco
vlan 5
authentication open
!
dot11 ssid GB-MAST
infrastructure-ssid
!
!
!
!
!
username CISCO password 7 106D000A0618
!
!
bridge irb
!
!
!
interface Dot11Radio0
no ip address
shutdown
!
encryption mode ciphers aes-ccm
antenna gain 0
packet retries 64 drop-packet
station-role root
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 spanning-disabled
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
!
interface Dot11Radio1
no ip address
!
ssid Cisco
!
antenna gain 0
peakdetect
packet retries 64 drop-packet
station-role workgroup-bridge
infrastructure-client
!
interface Dot11Radio1.5
encapsulation dot1Q 5 native
bridge-group 1
!
interface GigabitEthernet0
no ip address
duplex auto
speed auto
!
interface GigabitEthernet0.5
encapsulation dot1Q 5 native
bridge-group 1
!
interface GigabitEthernet1
no ip address
duplex auto
speed auto
bridge-group 1
bridge-group 1 spanning-disabled
!
interface BVI1
mac-address 00d7.8f6a.3ef6
ip address dhcp client-id GigabitEthernet0
ipv6 address dhcp
ipv6 address autoconfig
ipv6 enable
!
ip forward-protocol nd
ip http server
no ip http secure-server
ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
!
!
bridge 1 route ip
!
!
!
line con 0
line vty 0 4
login local
transport input all
!
end
