WIC-2T supported on NM-2E2W ?

[c.ong]

Hi Sir,

Can an NM-2E2W attached to a Cisco 3600 series router supports WIC-2T card? If no, what is the reason?

Thanks.

Delon.

[ahvn]

I think yes, NM2E2W supports wic-2T card

Rgds

Homin

[c.ong]

Hi Homin,

I found some info related to wic-2t from the following URL http://www.cisco.com/en/US/products/hw/modules/ps3129/products_tech_note09186a00800b0858.shtml

What do you think?

[jolmo]

Hi Delon

According to:

http://www.cisco.com/en/US/products/hw/modules/ps3129/products_tech_note09186a00800b0858.shtml#plat

in 3600 series WIC-2T is not supported with Ethernet Network Modules:

"The NM-1E2W, NM-1E1R2W, and NM-2E2W Network Modules do not have enough performance power to support the WIC-2T due to hardware limitations."

You will need a Fast Ethernet NM to support WIC-2T in a 3600 series

HTH

[ahvn]

Hi,

The previous answer is right.NM-2W or NM-FE modules will support WIC-2T.Sorry for the wrong assumption.

Rgds

Homin