AS5350 modem initialization times

[borologio]

Is there any way I can configure the AS5350 to minimize the modem initialization on incomming connections? My access server is currently averaging just over 21 seconds to initialize. To test agains the 5350, I have an ATT dial, granted I have no idea what type of equipment I am connecting to, but the average initialization time was just under 16 seconds. If I can shave an average of 5 seconds off each connection, I'll be saving quite a bit of money. Attached is the current running config. Any suggestions would be greatly appreciated.

Thanks,

Benjamin Orologio

Network Administrator

SGS Testcom Inc.

[borologio]

So I think the resolution to this would be to configure v.92 to quick connect. I am attempting this, however, the autoconfigure fails:

for all tty's:

%TTY-3-AUTOCONFIG: TTY1/03: Modem auto-configuration failed

config mods:

modemcap entry v92_v44:MSC=s62=8s63=1s21=15s29=12

line:

modem autoconfigure type v92_v44

I am running SPE firmware version 0.8.5.0 (np.8.5.spe) Is this an unsupported feature?